Corners for easy production of drawers 3D for print
3863 Views 2 Likes 3 Downloads Download the piece here from 3dforprint
There are lots of correct ways of creating small drawers for organising all your junk :)
If you know your way around wo...odworking tools and have a table saw you can combine 3D printed corners with regular woodwork.
These corners have a small radius on the outside, giving your drawers some depth, instead of a flat plane front.
The corners will mount flush with a 5mm thick wooden wall, 40mm or 60mm height, so either use a sheet of 5mm plywood, or make the sidewalls yourself with a tablesaw.
Sofar i've created 24 drawers of 100*160mm and 40mm deep, and aiming for total OCD (meaning I make a drawer for every uniqe tool or device I have and label that drawer)
Designer
catohagen3d model description
Print 4 corners for a drawerThere are lots of correct ways of creating small drawers for organising all your junk :)
If you know your way around wo...odworking tools and have a table saw you can combine 3D printed corners with regular woodwork.
These corners have a small radius on the outside, giving your drawers some depth, instead of a flat plane front.
The corners will mount flush with a 5mm thick wooden wall, 40mm or 60mm height, so either use a sheet of 5mm plywood, or make the sidewalls yourself with a tablesaw.
3d model print parameters
I printed mine in Colorfabb XT and superglued the wooden sides and bottoms, print with 3 walls and 30-50 infill or whatever you feel comfortable with....Sofar i've created 24 drawers of 100*160mm and 40mm deep, and aiming for total OCD (meaning I make a drawer for every uniqe tool or device I have and label that drawer)
