Drone race w4 drw4 3D for print
1966 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a micro multicopter pla printed.
It is designed to prevent the jello effect on the videos.
For th...is, all the electronic part is isolated by rubber O-rings. The results are perfect, the mobius gives a clean image.
This solution allows to isolate the sensitive parts of all the mechanical stresses of the structure .
The motors have an inverted dihedral , the aesthetic effect is interesting and yaw responsiveness is improved.
Hardware:
-Motors : 18-06 http://www.hobbyking.com/hobbyking/store/__66399__DYS_1804_2300KV_BX_Series_Set_of_Two_CW_CCW_Motors...
-ESC : 6AMP http://www.hobbyking.com/hobbyking/store/__65984__Turnigy_Multistar_6A_V2_ESC_With_BLHeli_and_LBEC_2...
- Naze 32
-Battery 3S 1400
-prop 5x3
Designer
Turbi3d model description
A mini multicopter for FPV racingThis is a micro multicopter pla printed.
It is designed to prevent the jello effect on the videos.
For th...is, all the electronic part is isolated by rubber O-rings. The results are perfect, the mobius gives a clean image.
This solution allows to isolate the sensitive parts of all the mechanical stresses of the structure .
The motors have an inverted dihedral , the aesthetic effect is interesting and yaw responsiveness is improved.
Hardware:
-Motors : 18-06 http://www.hobbyking.com/hobbyking/store/__66399__DYS_1804_2300KV_BX_Series_Set_of_Two_CW_CCW_Motors...
-ESC : 6AMP http://www.hobbyking.com/hobbyking/store/__65984__Turnigy_Multistar_6A_V2_ESC_With_BLHeli_and_LBEC_2...
- Naze 32
-Battery 3S 1400
-prop 5x3
