Encapsulated speaker 3D for print
1875 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Printing the element testing the worthiness of your printer will result better sound quality,... I did use layer height of 0.1mm and leaving some space for improvements to see in the future. Rest is up to the playfulness. After printing both the element and the mount I did attach the magnet with some glue and winded the coil to satisfy my audio amplifier with 4Ω of rebellion.
Brevity is the soul of wit; everything was crumpled with the aid of the infamous glue to form the matter.
Link provided for more information.
Magnet wire...
Designer
ndres3d model description
Detailed information: http://www.conplexio.blogspot.comPrinting the element testing the worthiness of your printer will result better sound quality,... I did use layer height of 0.1mm and leaving some space for improvements to see in the future. Rest is up to the playfulness. After printing both the element and the mount I did attach the magnet with some glue and winded the coil to satisfy my audio amplifier with 4Ω of rebellion.
Brevity is the soul of wit; everything was crumpled with the aid of the infamous glue to form the matter.
Link provided for more information.
3d model print parameters
1 neodymium magnet d:9mm h:5mmMagnet wire...
