Forms for cookies and gingerbread puzzle 3D for print
1503 Views 3 Likes 2 Downloads Download
The size of the cutter with drawing (number 2): cutter - 13.3х9.8х1.3 centimeter...s, drawing - 11.6х8.2х0.7 centimeters;
The size of individual cuttings (number 3) - +-4х4х1.3 centimeters each based on the shape;
The thickness of the walls of each form -1.2 centimeters;
The thickness of the bottom of each mold is - 2 mm.
I made this shape in three versions so that everyone could find a suitable one for themselves, one single shape, one with a separate drawing and cutting, and separate cutting puzzles.
The shape on the upper perimeter has a sharpened edge for comfortable use, which eliminates simple pressing, contributing to the accurate cutting of the shape in the
test.
Schematic examples of forms in the profile can be viewed in the latest images.
I hope you like my form and the result, and i would be grateful for feedback to improve the quality of current and future forms!
- two perimeter;
- nozzle 0.3, the width of the layer 0.36, layer height 0.2;
- filling 30%;
- speed ...above average.
Designer
DMITRIYSK3D3d model description
The size of a single form (number 1) - 11.8х8.4х1.3 centimeters;The size of the cutter with drawing (number 2): cutter - 13.3х9.8х1.3 centimeter...s, drawing - 11.6х8.2х0.7 centimeters;
The size of individual cuttings (number 3) - +-4х4х1.3 centimeters each based on the shape;
The thickness of the walls of each form -1.2 centimeters;
The thickness of the bottom of each mold is - 2 mm.
I made this shape in three versions so that everyone could find a suitable one for themselves, one single shape, one with a separate drawing and cutting, and separate cutting puzzles.
The shape on the upper perimeter has a sharpened edge for comfortable use, which eliminates simple pressing, contributing to the accurate cutting of the shape in the
test.
Schematic examples of forms in the profile can be viewed in the latest images.
I hope you like my form and the result, and i would be grateful for feedback to improve the quality of current and future forms!
3d model print parameters
The setting is individual, but I was typing:- two perimeter;
- nozzle 0.3, the width of the layer 0.36, layer height 0.2;
- filling 30%;
- speed ...above average.
