Fpv250 tilt camera mount 3D for print

Designer

MoHaG

3d model description

A Tilt mount for larger board cameras for the front of the FPV250 from Hobbyking / Diatone. Might be suitable for other airframes as well.
A Tilt mou...nt for larger board cameras for the front of the FPV250 from Hobbyking / Diatone.
Max camera size: 40x40mm
It has holes where all my cameras have cables...
Alternative version of the mount for other quads / planes are included.
Alternative camera backplates are included for mounting the camera lower / from the bottom (as on planes)
Needs a small servo for tilt.
FPV250 frame can be obtained from here: [ARF, with motors, ESCs, battery](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=52863&aff=1090853) [Bare frame only](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=47075&aff=1090853)
Cameras taken into account: [420TVL](http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=11977&aff=1090853) 700TVL Sony with OSD control connector (in metal housing) Read more

3d model print parameters

- One camera back-plate (choose a suitable one)
- One mount
- A M3-40 screw
- A M3 nylock nut
- 4 M3 washers...

Tags

Camera Quadcopter Fpv Fpv250 Board camera Camera mount Toys Toy Game

License

CC Atribution