Full size anatomically-correct 18-piece magnetic human skull model 3D for print
1124 Views 3 Likes 0 Downloads Download
...
See here for stable download: https://thangs.com/mythangs/file/60036
To assemble with magnets, you will need:
• 66 of 1/8” x 1/16” cylindrical
• 38 of 1/4” x 1/8” cylindrical
www.kjmagnetics.com is a good source of magnets.
Files are provided in anatomical orientation. You will need to reorient and prepare them according to your preferences, equipment, and skill level. Here are some considerations:
• Orient outer surfaces upwards so that the surfaces in contact with support structures are less visible in the final model.
• As much as possible, avoid orienting the magnetic anchors downwards. There are some situations in which this is unavoidable. These can be cleaned up post-print.
Here are considerations for assembly:
• Before inserting magnets, clean out the magnet anchors with a 1/8” or 1/4” drill bit to remove any imperfections, allowing the magnets to sit properly.
• Ensure that you insert magnets with polarity oriented to allow proper connection of bones.
• You may need to use glue to secure some of the magnets in place. CA glue works well.
Every attempt has been made to maintain anatomical correctness; however, the following small modifications were necessary to optimize the files for 3D printing:
• The nasal bones, lacrimal bones and upper teeth are fused to ipsilateral maxilla. Lower teeth are fused to the mandible. They are too small and thin to print and assemble on their own.
• Some areas of bone have been thickened to support the magnet anchors.
• Gaps have been created or expended between fused joints to allow these bones to be separated.
• The perpendicular plate of the ethmoid bone has been removed. It is too thin and there is limited space for it to fit properly.
• Bones of the inner ear are not included.
• This model includes only bony structures.
Updates:
May 13, 2021: Repaired mesh error in Parietal Bone right.
Here are more of my anatomical designs you might enjoy:
Novelty:
Wearable Spine: https://www.thingiverse.com/thing:4982223
Skull Jewelry Set: https://www.thingiverse.com/thing:4980129
Happy Halloween Spine: https://www.thingiverse.com/thing:4979522
Eyeball Windchime: https://www.thingiverse.com/thing:4978632
Fingerbone Windchime: https://www.thingiverse.com/thing:4962956
Skull Windchime: https://www.thingiverse.com/thing:4962814
Creepy Custom Embossed Spine: https://www.thingiverse.com/thing:4916377
Mini Articulating Spine Keychain: https://www.thingiverse.com/thing:4891846
Big Bowl O’ Back Bones: https://www.thingiverse.com/thing:4881377
Vertebral Stacking Blocks: https://www.thingiverse.com/thing:4868387
Anatomically Correct Voronoi Heart: https://www.thingiverse.com/thing:4636146
Vertebrae with Secret Compartment: https://www.thingiverse.com/thing:4633188
Brain Puzzle: https://www.thingiverse.com/thing:4158232
Anatomical Heart Puzzle: https://www.thingiverse.com/thing:4146688
Educational:
6-Piece Magnetic Female Pelvis Model: https://www.thingiverse.com/thing:4946668
Fryette’s Laws Teaching Tool: https://www.thingiverse.com/thing:4887712
Hip and Pelvis Model: https://www.thingiverse.com/thing:4875641
Flexible Three-Quarter Spine Model with Display Stand: https://www.thingiverse.com/thing:4863003 Full Size Anatomically Correct Human Foot Model: https://www.thingiverse.com/thing:4849504
Full Size Anatomically Correct Human Hand Model: https://www.thingiverse.com/thing:4841107
Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model: https://www.thingiverse.com/thing:4830026
Full-sized Anatomically Correct Articulating Spine: https://www.thingiverse.com/thing:4801717
Articulating Lumbar Vertebrae: https://www.thingiverse.com/thing:4637241
Designer
DaveMakesStuff3d model description
This human skull model can be used for learning anatomy or just freaking out your friends. See here for assembly video: https://youtu.be/dm0RT-1eFFc...
See here for stable download: https://thangs.com/mythangs/file/60036
To assemble with magnets, you will need:
• 66 of 1/8” x 1/16” cylindrical
• 38 of 1/4” x 1/8” cylindrical
www.kjmagnetics.com is a good source of magnets.
Files are provided in anatomical orientation. You will need to reorient and prepare them according to your preferences, equipment, and skill level. Here are some considerations:
• Orient outer surfaces upwards so that the surfaces in contact with support structures are less visible in the final model.
• As much as possible, avoid orienting the magnetic anchors downwards. There are some situations in which this is unavoidable. These can be cleaned up post-print.
Here are considerations for assembly:
• Before inserting magnets, clean out the magnet anchors with a 1/8” or 1/4” drill bit to remove any imperfections, allowing the magnets to sit properly.
• Ensure that you insert magnets with polarity oriented to allow proper connection of bones.
• You may need to use glue to secure some of the magnets in place. CA glue works well.
Every attempt has been made to maintain anatomical correctness; however, the following small modifications were necessary to optimize the files for 3D printing:
• The nasal bones, lacrimal bones and upper teeth are fused to ipsilateral maxilla. Lower teeth are fused to the mandible. They are too small and thin to print and assemble on their own.
• Some areas of bone have been thickened to support the magnet anchors.
• Gaps have been created or expended between fused joints to allow these bones to be separated.
• The perpendicular plate of the ethmoid bone has been removed. It is too thin and there is limited space for it to fit properly.
• Bones of the inner ear are not included.
• This model includes only bony structures.
Updates:
May 13, 2021: Repaired mesh error in Parietal Bone right.
Here are more of my anatomical designs you might enjoy:
Novelty:
Wearable Spine: https://www.thingiverse.com/thing:4982223
Skull Jewelry Set: https://www.thingiverse.com/thing:4980129
Happy Halloween Spine: https://www.thingiverse.com/thing:4979522
Eyeball Windchime: https://www.thingiverse.com/thing:4978632
Fingerbone Windchime: https://www.thingiverse.com/thing:4962956
Skull Windchime: https://www.thingiverse.com/thing:4962814
Creepy Custom Embossed Spine: https://www.thingiverse.com/thing:4916377
Mini Articulating Spine Keychain: https://www.thingiverse.com/thing:4891846
Big Bowl O’ Back Bones: https://www.thingiverse.com/thing:4881377
Vertebral Stacking Blocks: https://www.thingiverse.com/thing:4868387
Anatomically Correct Voronoi Heart: https://www.thingiverse.com/thing:4636146
Vertebrae with Secret Compartment: https://www.thingiverse.com/thing:4633188
Brain Puzzle: https://www.thingiverse.com/thing:4158232
Anatomical Heart Puzzle: https://www.thingiverse.com/thing:4146688
Educational:
6-Piece Magnetic Female Pelvis Model: https://www.thingiverse.com/thing:4946668
Fryette’s Laws Teaching Tool: https://www.thingiverse.com/thing:4887712
Hip and Pelvis Model: https://www.thingiverse.com/thing:4875641
Flexible Three-Quarter Spine Model with Display Stand: https://www.thingiverse.com/thing:4863003 Full Size Anatomically Correct Human Foot Model: https://www.thingiverse.com/thing:4849504
Full Size Anatomically Correct Human Hand Model: https://www.thingiverse.com/thing:4841107
Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model: https://www.thingiverse.com/thing:4830026
Full-sized Anatomically Correct Articulating Spine: https://www.thingiverse.com/thing:4801717
Articulating Lumbar Vertebrae: https://www.thingiverse.com/thing:4637241
