Garmin vivoactive hr handelbar holder 3D for print
3682 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Handelbar holder for Garmin Viovoactive HR.
Diamter: about 27mm
Filament
The filament should be sui...table for "being in the sun".
I used PETG. Should also work with ABS.
I do not recomend PLA > it could melt in the sun :-)
Soft pad
I recomend to put a soft pad on the top.
Fixation
Tighten with a cable tie and cut it flush.
Designer
pgx3d3d model description
Handelbar holder for Garmin Viovoactive HRHandelbar holder for Garmin Viovoactive HR.
Diamter: about 27mm
Filament
The filament should be sui...table for "being in the sun".
I used PETG. Should also work with ABS.
I do not recomend PLA > it could melt in the sun :-)
Soft pad
I recomend to put a soft pad on the top.
Fixation
Tighten with a cable tie and cut it flush.
![Apple Watch Band [Ninjaflex]](https://www.3dforprint.com/modelos/5341/apple-watch-band-ninjaflex1_medium.jpg)
