Legend of zelda mastersword lightsaber hilt sleeve 3D for print
627 Views 0 Likes 0 Downloads Download
The hollow version for the "wing" of the guard to save on resin/filament but for resin just make sure to make the drain holes.
Fitted for lightsaber handle dimensions: (but I would still suggest test prints for fitting)
Diameter 1.5 inches / 38.1 millimeters
Length 10.5 inches / 266.7 millimeters
Amazon link for lightsaber used
https://www.amazon.com/gp/product/B0964V7LVT/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Designer
None Ya3d model description
Legend of Zelda Mastersword lightsaber hilt sleeve. I designed it to fit a lightsaber so the handle slides inside. The connections are not permanent b...ut can be glued together, just don't glue the guard to the handle then you cannot take the lightsaber out. Hole in the side of the handle is for the placement of the lightsaber button.The hollow version for the "wing" of the guard to save on resin/filament but for resin just make sure to make the drain holes.
Fitted for lightsaber handle dimensions: (but I would still suggest test prints for fitting)
Diameter 1.5 inches / 38.1 millimeters
Length 10.5 inches / 266.7 millimeters
Amazon link for lightsaber used
https://www.amazon.com/gp/product/B0964V7LVT/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
