Lift table 130x100 3D for print
2948 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Supports should only be set when printing Base_gr and Base_top, the overhang angl...e of the support is 82 degrees, so that the support is not printed in the holes, otherwise they will be difficult to clean.
All the details are located in the files with the orientation as they should be printed. The required number of parts is multiplied for successful assembly.
The platform dimensions can be easily modified, increasing to 250 mm if necessary for your needs. During the test, the platform withstood 5 kg of cargo.
https://youtu.be/yLBAJbY2BgQ
If you don't have a 3D Printer, you can print it from a Service like https://www.jawstec.com/3d-printing-service/
Designer
MIK BAR3d model description
There are no details here except those that you can print yourself.Supports should only be set when printing Base_gr and Base_top, the overhang angl...e of the support is 82 degrees, so that the support is not printed in the holes, otherwise they will be difficult to clean.
All the details are located in the files with the orientation as they should be printed. The required number of parts is multiplied for successful assembly.
The platform dimensions can be easily modified, increasing to 250 mm if necessary for your needs. During the test, the platform withstood 5 kg of cargo.
https://youtu.be/yLBAJbY2BgQ
If you don't have a 3D Printer, you can print it from a Service like https://www.jawstec.com/3d-printing-service/
![Monterey Jack ([CZ] - Monty Jack)](https://www.3dforprint.com/modelos/6947/monterey-jack-cz-monty-jack1_medium.JPG)
