5 paw patrol cookie cutters 3D for print
1470 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Marshall Rubble Chase Skye Logo
I put an STL of each, as well as an STL of the logo.
I also attached a small sho...rtbread recipe to enjoy these beautiful cookie cutters ;-)
No
Resolution:
0.2
Infill:
0 or 10
Notes:
Printable with all printers. the exterior walls are 1.5mm. So be sure to put either:
1... layer of plaster and 0% filling (very good)2 layers with wall filling (S3D)But otherwise everything should be suitable for shortbread successful!
Designer
Papapoule3d model description
5 paw patrol cookie cutters:Marshall Rubble Chase Skye Logo
I put an STL of each, as well as an STL of the logo.
I also attached a small sho...rtbread recipe to enjoy these beautiful cookie cutters ;-)
3d model print parameters
Supports:No
Resolution:
0.2
Infill:
0 or 10
Notes:
Printable with all printers. the exterior walls are 1.5mm. So be sure to put either:
1... layer of plaster and 0% filling (very good)2 layers with wall filling (S3D)But otherwise everything should be suitable for shortbread successful!
