Powercode 3d printer 3D for print
1132 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The frame is thinking for you don't have to threading it.
The structu...re has two bars to stiffen the joint between the frame and the axis Y.
Easily leveling platform with three supporting points and only two screws to level.
Tensioning belts on the X axis and Y. The X axis is directly interchangeable with any Prusa I3 printer and it's a great advantage.
Front and rear aluminum parts to replace the threaded rods and improve aesthetics.
This 3d printer has a long way in Spain, it was designed almost two years ago, I would like that it wil be knonw arround the world.
You can see more documentation and the last modifications at the github:
https://github.com/Mecan0/Code/
Other interestings links:
Assembly instructions in Spanish:
https://drive.google.com/file/d/0Bz2-pRbzwDNWWjBjckh4Nkh5Yzg/edit?usp=sharing
http://lab.shuttl3d.com/imprescindibles/montaje-power-code
The openscad files are thanks to J Rodrigo.
4 x 380 mm, (Axis X and Y)
2 x 330 mm (Axis Z)
1 x 20 mm (Extruder)
Threaded rods / Varillas roscadas
...2 x M10 x 390 mm
2 x M5 x 300 mm
Linear Bearings /Rodamientos lineales
11 ud del LM8uu ó
11 ud casquillo Igus diam. 8 mm RJM-01-08
Belt, Pulleys and bearings / Correas, poleas y rodamientos
820 mm GT2 Eje X
650 mm GT2 Eje Y
2 ud poleas GT2 20 dientes
2 ud rodamiento 623
Designer
Manuel Palacios (Mecano)3d model description
The PowerCode is a variation of the Prusa I3 to implement certain avantages.The frame is thinking for you don't have to threading it.
The structu...re has two bars to stiffen the joint between the frame and the axis Y.
Easily leveling platform with three supporting points and only two screws to level.
Tensioning belts on the X axis and Y. The X axis is directly interchangeable with any Prusa I3 printer and it's a great advantage.
Front and rear aluminum parts to replace the threaded rods and improve aesthetics.
This 3d printer has a long way in Spain, it was designed almost two years ago, I would like that it wil be knonw arround the world.
You can see more documentation and the last modifications at the github:
https://github.com/Mecan0/Code/
Other interestings links:
Assembly instructions in Spanish:
https://drive.google.com/file/d/0Bz2-pRbzwDNWWjBjckh4Nkh5Yzg/edit?usp=sharing
http://lab.shuttl3d.com/imprescindibles/montaje-power-code
The openscad files are thanks to J Rodrigo.
3d model print parameters
Smood rods / Varillas lisas cromadas4 x 380 mm, (Axis X and Y)
2 x 330 mm (Axis Z)
1 x 20 mm (Extruder)
Threaded rods / Varillas roscadas
...2 x M10 x 390 mm
2 x M5 x 300 mm
Linear Bearings /Rodamientos lineales
11 ud del LM8uu ó
11 ud casquillo Igus diam. 8 mm RJM-01-08
Belt, Pulleys and bearings / Correas, poleas y rodamientos
820 mm GT2 Eje X
650 mm GT2 Eje Y
2 ud poleas GT2 20 dientes
2 ud rodamiento 623