Print in place pcb-holder / gripper 3D for print
3614 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
See it in action, and get all the info here:
https://youtu.be/jN2l7cCoVB4
https://youtu.be/jN2l7cCoVB4
https...://youtu.be/jN2l7cCoVB4
https://youtu.be/jN2l7cCoVB4
There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard ender 3 +pla and no supports)
Recommended print settings:
No suports!
All clearances are 0.3mm or more - Ad horizontal expansion as needed.
Simplified-3D users: S3D might have issues with intersecting bodies go to Mesh > Separate Connected Surfaces. check the preview before printintg.
0.2mm Layer height or finer
PLA or ABS tested and working.
Check out my social media :
YouTube
Facebook
Instagram
Designer
SUNSHINE3d model description
This is my print in place PCB-Holder,See it in action, and get all the info here:
https://youtu.be/jN2l7cCoVB4
https://youtu.be/jN2l7cCoVB4
https...://youtu.be/jN2l7cCoVB4
https://youtu.be/jN2l7cCoVB4
There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard ender 3 +pla and no supports)
Recommended print settings:
No suports!
All clearances are 0.3mm or more - Ad horizontal expansion as needed.
Simplified-3D users: S3D might have issues with intersecting bodies go to Mesh > Separate Connected Surfaces. check the preview before printintg.
0.2mm Layer height or finer
PLA or ABS tested and working.
Check out my social media :
YouTube
