Sagrotan® / dettol no-touch soap dispenser refill cap - tpu 3D for print
821 Views 0 Likes 0 Downloads Download
There are 2 STLs: One for printing the cap with TPU, which I highly recommend, and one for none flexible Filament.
Flexible caps are much easier to remove than none flexible.
The cap is not watertight, it just seals the soap against dust.
To print 94A TPU with my bowden printer Geeetech A10 I used these settings in Cura:
Speed: 20 mm/s
Infill: 20 %
Printing Temperature: 220 °C
Build Plate Temperature: 40 °C
Retraction Distance: 2 mm
Retraction Speed 30 mm/s
To also reduce the wastage of soap I used this adapter:
https://www.thingiverse.com/thing:3240308
Works perfectly!
Designer
Ralf Meier3d model description
This makes the "Refills" of the No-Touch Soap Dispenser really refillable. I used a 15 mm Forstner Bit on a drill press with a vise to drill the hole ...into the empty Refill Container.There are 2 STLs: One for printing the cap with TPU, which I highly recommend, and one for none flexible Filament.
Flexible caps are much easier to remove than none flexible.
The cap is not watertight, it just seals the soap against dust.
To print 94A TPU with my bowden printer Geeetech A10 I used these settings in Cura:
Speed: 20 mm/s
Infill: 20 %
Printing Temperature: 220 °C
Build Plate Temperature: 40 °C
Retraction Distance: 2 mm
Retraction Speed 30 mm/s
To also reduce the wastage of soap I used this adapter:
https://www.thingiverse.com/thing:3240308
Works perfectly!
