Satisfying hexagons 3D for print
3174 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
It can be used as a desk decoration.
Ideally you need 4 small magnets for this to...y. I used 6 mm diameter / 2.5 mm height.
If you don't have any magnets laying around you could just print the pin at a shorter length and operate it from the top. It won't have the same effect but it should still do the trick.
Check out my other designs:
https://cults3d.com/en/3d-model/game/beads-carousel
https://cults3d.com/en/3d-model/art/whirly-tetrahedron-desk-decoration
https://cults3d.com/en/3d-model/game/kaleidocycle-the-lazy-engineer
https://cults3d.com/en/3d-model/game/orbit-spinning-top
https://cults3d.com/en/3d-model/game/split-sphere-spinning-top
Last update: 2020/08/04 at 09:12
Publication date: 2020/07/02 at 19:37
...
Designer
The 3D models of the-lazy-engineer3d model description
Just a small geometric toy that's oddly satisfying to play with.It can be used as a desk decoration.
Ideally you need 4 small magnets for this to...y. I used 6 mm diameter / 2.5 mm height.
If you don't have any magnets laying around you could just print the pin at a shorter length and operate it from the top. It won't have the same effect but it should still do the trick.
Check out my other designs:
https://cults3d.com/en/3d-model/game/beads-carousel
https://cults3d.com/en/3d-model/art/whirly-tetrahedron-desk-decoration
https://cults3d.com/en/3d-model/game/kaleidocycle-the-lazy-engineer
https://cults3d.com/en/3d-model/game/orbit-spinning-top
https://cults3d.com/en/3d-model/game/split-sphere-spinning-top
3d model print parameters
3D file format: STLLast update: 2020/08/04 at 09:12
Publication date: 2020/07/02 at 19:37
...
