Scifi light sculpture 3D for print
1988 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Lamp base was printed in Colorfabb's Bronzefill
Layer Height: .1mm
Wall Thickness: 1.2mm
Fill: 20%
Speed: 50mm/s
Print Time: 9 hours
The top is Printed separately in Colorfabb XT Clear
Layer Height: .3mm
Shell: .8mm or you may want to try 1.2mm for a tight fit.
Temp: 230c
Wall Thickness: Spiralize the outer contour selected in Cura
Speed: 25mm/s
Print Time: 1.5 Hours
**note**
the lamp shade is a solid part and requires "Spiralize the outer contour" to be selected in Cura or other slicing software.
Use a brim but be careful not to damage the bottom when removing it.
Lights: $13 Amazon http://www.amazon.com/gp/product/B00FZSQN44/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Designer
Christopher Walker3d model description
two part light sculpture **note** the lamp shade is a solid part and requires "Spiralize the outer contour" to be selected in Cura or other slicing so...ftware.Lamp base was printed in Colorfabb's Bronzefill
Layer Height: .1mm
Wall Thickness: 1.2mm
Fill: 20%
Speed: 50mm/s
Print Time: 9 hours
The top is Printed separately in Colorfabb XT Clear
Layer Height: .3mm
Shell: .8mm or you may want to try 1.2mm for a tight fit.
Temp: 230c
Wall Thickness: Spiralize the outer contour selected in Cura
Speed: 25mm/s
Print Time: 1.5 Hours
**note**
the lamp shade is a solid part and requires "Spiralize the outer contour" to be selected in Cura or other slicing software.
Use a brim but be careful not to damage the bottom when removing it.
Lights: $13 Amazon http://www.amazon.com/gp/product/B00FZSQN44/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
