Smars modular robot 3D for print
5051 Views 2 Likes 4 Downloads Download
Join the Facebook group! https://goo.gl/4EgJhX
Facebook page: https://goo.gl/Gcmxp5
To build the basic model (with “chassis -SL.stl”) you just need few extra components:
-2x mini 150RPM motors https://amzn.to/2QYgbQY
http://s.click.aliexpress.com/e/by2RFfHq
-1x 9[V] battery https://amzn.to/2BozgSH
http://s.click.aliexpress.com/e/hEy2L3E
-1x 9[V] battery connector https://amzn.to/2PIzfxS
http://s.click.aliexpress.com/e/jDzqDWY
-1x Arduino UNO https://amzn.to/2BqSdE
http://s.click.aliexpress.com/e/Qc3oVvA
-1x Adafruit Motor Shield V1 or V2 https://amzn.to/2Qy8fXf
http://s.click.aliexpress.com/e/ghtEQa8
or https://amzn.to/2QXvj18
http://s.click.aliexpress.com/e/bExt3Mv6
For the screwed version ( “chassis -S.stl”) you just need two 25mm M4 screws and two self locking nuts.
TIPS:
The joints of the tracks are simply pieces of 1.75mm filament cutted at the right length.
To assemble the screwless version you will need a multi slip-joint gripping plier to insert the “slave wheels”.
One of the next DLC will be the Quadpod mod. if you are interessted to move from tracks to legs, use the screwed version “chassis-S.stl” (“chassis-SL” will not be compatible)!
These models fits also:
-3x AAA batteries (check on my profile for the DLC)
-1x PS3 controller 1800mAh 3.7V Li-Ion Battery (be careful and use it only if you
know what you are doing!)
http://s.click.aliexpress.com/e/bgVGHcLA
Video: https://youtu.be/JCqkuDWNzIg
P.S updated files for ultrasonic 2a and 2b, use these ones, the old ones have an error and you can have some troubles during printing
layers 0.2mm
supports touching building plate only in file "chassis_SL"...
Designer
TUITXY3d model description
SMARS acronym of “Screwless/Screwed Modular Assemblable Robotic System” is a simple robot designed to the educational field. The main features of ...SMARS are the reduced number of components, the possibility of mount it without screws and without soldering any part, it doesn’t need glue or similar and it’s really cheap to build. Another main point of SMARS is the modular design. You can mount different sensors and tools and design your own parts. In future I’ll add new modules or DLC to improve the model but It would be nice if you could share your mods too.Join the Facebook group! https://goo.gl/4EgJhX
Facebook page: https://goo.gl/Gcmxp5
To build the basic model (with “chassis -SL.stl”) you just need few extra components:
-2x mini 150RPM motors https://amzn.to/2QYgbQY
http://s.click.aliexpress.com/e/by2RFfHq
-1x 9[V] battery https://amzn.to/2BozgSH
http://s.click.aliexpress.com/e/hEy2L3E
-1x 9[V] battery connector https://amzn.to/2PIzfxS
http://s.click.aliexpress.com/e/jDzqDWY
-1x Arduino UNO https://amzn.to/2BqSdE
http://s.click.aliexpress.com/e/Qc3oVvA
-1x Adafruit Motor Shield V1 or V2 https://amzn.to/2Qy8fXf
http://s.click.aliexpress.com/e/ghtEQa8
or https://amzn.to/2QXvj18
http://s.click.aliexpress.com/e/bExt3Mv6
For the screwed version ( “chassis -S.stl”) you just need two 25mm M4 screws and two self locking nuts.
TIPS:
The joints of the tracks are simply pieces of 1.75mm filament cutted at the right length.
To assemble the screwless version you will need a multi slip-joint gripping plier to insert the “slave wheels”.
One of the next DLC will be the Quadpod mod. if you are interessted to move from tracks to legs, use the screwed version “chassis-S.stl” (“chassis-SL” will not be compatible)!
These models fits also:
-3x AAA batteries (check on my profile for the DLC)
-1x PS3 controller 1800mAh 3.7V Li-Ion Battery (be careful and use it only if you
know what you are doing!)
http://s.click.aliexpress.com/e/bgVGHcLA
Video: https://youtu.be/JCqkuDWNzIg
P.S updated files for ultrasonic 2a and 2b, use these ones, the old ones have an error and you can have some troubles during printing
3d model print parameters
infill 20%layers 0.2mm
supports touching building plate only in file "chassis_SL"...
