Tom dixon's etch shade inspired lamp 3D for print
929 Views 1 Likes 0 Downloads Download
...
3x etch120cable x3.stl
1x etch120-puerta-A.stl
1x etch120-puerta-B.stl
20x etch120 x20.stl
1x etch120_sopcable2.stl
1 x M3 bolt t...o restrain the wire inside the "etch120_sopcable2.stl"
Wire (5-6mm external diameter)
1 x light bulb base (maybe you need a plastic clamp to atach the wire inside the base)
96 x 2-2.5 mm width white plastic clamps to join the faces
1 x plastic clamp to make the pendant tie with the wire
1 x spotted omni directional bulb (no LED or white bulb, you need a point light or concentrated light to guet the best results). A good one is an halogen bulb http://www.cherylpettdesign.com/wp-content/uploads/2014/02/halogen.jpg
Designer
Egrojyos3d model description
Tom Dixon's Etch Shade inspired Lamp....
3d model print parameters
You'll need:3x etch120cable x3.stl
1x etch120-puerta-A.stl
1x etch120-puerta-B.stl
20x etch120 x20.stl
1x etch120_sopcable2.stl
1 x M3 bolt t...o restrain the wire inside the "etch120_sopcable2.stl"
Wire (5-6mm external diameter)
1 x light bulb base (maybe you need a plastic clamp to atach the wire inside the base)
96 x 2-2.5 mm width white plastic clamps to join the faces
1 x plastic clamp to make the pendant tie with the wire
1 x spotted omni directional bulb (no LED or white bulb, you need a point light or concentrated light to guet the best results). A good one is an halogen bulb http://www.cherylpettdesign.com/wp-content/uploads/2014/02/halogen.jpg
