Trick bolt - different style - confuse your friends! - puzzle 3D for print
1254 Views 0 Likes 0 Downloads Download
This is a trick bolt you can give to someone. It threads in the middle to allow you to put the nut on, then thread it back toget...her and the seam will disappear, as if it was printed right onto the bolt. My friend used to make them on his lathe, I thought it would be cool to print.
The overall height is 58mm and the thread is 2mm on the outside with a 0.2mm clearance, and the thread on the inside is 1.5 with 0.2mm clearance.
I have not printed this yet.
Open to suggestions!
Designer
hodginsa3d model description
Feeling adventurous?This is a trick bolt you can give to someone. It threads in the middle to allow you to put the nut on, then thread it back toget...her and the seam will disappear, as if it was printed right onto the bolt. My friend used to make them on his lathe, I thought it would be cool to print.
The overall height is 58mm and the thread is 2mm on the outside with a 0.2mm clearance, and the thread on the inside is 1.5 with 0.2mm clearance.
I have not printed this yet.
Open to suggestions!
