Ukulele bass 3D for print
4197 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
Ukulele Bass
This bass is inspired by the Kala Ubass. It is almost fully printable, except for "serious..." mechanics, I wanted to be able to do a real setup with correct intonation, therefor this design uses a Fender style bridge. The strings are ThunderGut standard strings. As seen on pictures there is a hole in the bottom intended to be used with a Fishmann Presys Blend pickup system.
Listen to it hear https://soundcloud.com/david-bjorklund-810661191
No support is needed
Designer
David Bjerre Bjørklund3d model description
This is a contra bass guitar ukulele size!Ukulele Bass
This bass is inspired by the Kala Ubass. It is almost fully printable, except for "serious..." mechanics, I wanted to be able to do a real setup with correct intonation, therefor this design uses a Fender style bridge. The strings are ThunderGut standard strings. As seen on pictures there is a hole in the bottom intended to be used with a Fishmann Presys Blend pickup system.
Listen to it hear https://soundcloud.com/david-bjorklund-810661191
3d model print parameters
Everything is printed using pla. Neck and head is printed with 70% infill. Layerheight at 0.35 using 0.8 nozzle. Nut is printed at 90% infill layerhei...ght 0.15 with 0.4 nozzle.No support is needed
