Yet another ultimaker 2 feeder 3D for print

Designer

sfriedri

3d model description

This feeder designs combines the best aspects of the two existing feeder designs from |Robert| and Geeks.
This feeder designs combines the two existi...ng feeder designs from |Robert| and Geeks:

- https://www.youmagine.com/designs/alternative-um2-feeder-version-two
- https://www.youmagine.com/designs/extruder-um2-version-2

- Body and latch by |Robert|
- Filament guide and knurled wheel for tension setting by Geeks


This design erases the need for additional filament guides for Roberts Feeder and allows an easy adjustment of the spring tension without allen key.

For assembly instructions see the original |Robert| design: https://www.youmagine.com/designs/alternative-um2-feeder-version-two#!design-information

Additional assembly:

- assemble the yoke at the body arm with the M3x35 screw and mount the knurled wheel with the M3 nut behind the spring with the washers

- assemble the two wheels with 2x M3x10 screws Read more

3d model print parameters

Recommended Material:

- ColorFabb XT

- PLA: Some latches broke printed in PLA, even 100% filled. Better use ColorFabb XT oder ABS

Print the f...ollowing parts:

- 1x UM2_feeder_body.STL

- 1x UM2_feeder_body_arm.STL

- 1x UM2_feeder_guide_arm.STL

- 1x UM2_feeder_hubAdapterA.STL

- 1x UM2_feeder_hubAdapterB.STL

- 1x UM2_feeder_knurl.STL

- 1x UM2_feeder_latch.STL

- 1x UM2_feeder_snapOnGuide.STL

- 1x UM2_feeder_spacerUseSpiralize0.7.STL

- 1x UM2_feeder_wheel.STL

- 1x UM2_feeder_yoke.STL

Necessary parts from original Ultimaker2 feeder:

- 1x spring

- 2x M3 washer

- 1x M3 nut

- 1x ball bearing

Additional parts:

- 1x M3x14

- 1x M3x35 screw

- 1x M3x10

- 1x piece of bowden tube Read more

Tags

Ultimaker Ultimaker2 Feeder Ultimaker2 feeder Geeks Robert Tools

License

CC Atribution