Ada robotic hand 3D for print


 Ada robotic hand  3d model for 3d printers

 Ada robotic hand  3d model for 3d printers
 Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers Ada robotic hand  3d model for 3d printers
4607 Views 6 Likes 1 Downloads Download

Designer

Open Bionics

3d model description

The Ada robotic hand from Open Bionics, a fully 3D printable robotic hand, derived from the Dextrus robotic hand by the Open Hand Project .
This is t...he Ada robotic hand from Open Bionics (www.openbionics.com), a fully 3D printable robotic hand, derived from the Dextrus robotic hand by the Open Hand Project .This hand design is completely open source and free for you to download and use.

All of the components required for a right hand start with 'R' and the components for a left hand start with 'L'.

A single hand requires the following 3D printed components:
- Palm - Ninjaflex
- Back Cover - PLA/ABS
- PCB Tray Upper - PLA/ABS
- PCB Tray Lower - PLA/ABS

Non-3D printed components:
- 9 x M3 bolts (6mm length)
- 13 x M3 threaded push inserts
- 1m x 0.7mm tendon string
- 5 x Firgelli 12V linear actuators (PQ12-30-12-P)
- 1 x Open Bionics Almond electronics
- 5 x Micro gel fingertip grips]
- Super glue
(All of the above components are available from www.openbionics.com/shop)
Version History
16/02/16 - Ada V1.1
A step was added on the dorsal (back) side of the proximal finger joints. This "absorbs" the impact of any top layer curling during printing, protecting the joints. This should prevent any hands printing with floppy fingers on un-optimised machines.
02/02/16 - Ada V1.0
Initial release of the Ada hand

For assembly instructions and a guide on installing the firmware, we have written a few tutorials (www.openbionics.com/tutorials).
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License (http://creativecommons.org/licenses/by-sa/4.0/)


3d model print parameters

Non-3D printed components:
- 9 x M3 bolts (6mm length)
- 13 x M3 threaded push inserts
- 1m x 0.7mm tendon string
- 5 x Firgelli 12V linear actuat...ors (PQ12-30-12-P)
- 1 x Open Bionics Almond electronics
- 5 x Micro gel fingertip grips
- Super glue
(All of the above components can be sourced from www.openbionics.com/shop)


Tags

Bionics Open bionics Openbionics Hand Prosthetic hand Hands Robot Robotics Robotic hand Robot hand Prosthesis Prosthetic Flexible Ninjaflex Flexible filament Flexy Flexible_filament Toys Toy Game

License

CC Atribution

Related 3d models with tags

Brunel Hand STL files (.zip)

Brunel Hand STL files (.zip)

Dextra

Dextra

Fusion Hand

Fusion Hand

hand experiment 101

hand experiment 101

Hand

Hand

Raptor Reloaded by e-NABLE

Raptor Reloaded by e-NABLE

Fusion Arm

Fusion Arm

Steampunk Iron Man Hand

Steampunk Iron Man Hand

Gargoyle

Gargoyle

e-Nable - YuLia Custom hand

e-Nable - YuLia Custom hand

Human hand

Human hand

The Raptor Hand by e-NABLE

The Raptor Hand by e-NABLE